|
Sensing Beam
|
660 nm visible red
|
|
Supply Voltage
|
10 to 30V dc (10% max. ripple) @ 25 mA max current, exclusive of load
|
|
Supply Protection Circuitry
|
Protected against reverse polarity, over voltage, and transient voltages
|
|
Delay at Power-Up
|
250 ms; outputs do not conduct during this time
|
|
Output Configuration
|
Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN)
|
|
Output Ratings
|
150 mA maximum load (derate ~ 1 mA/°C above 25°C)
OFF-state leakage current: < 50 μA at 30V dc
ON-state saturation voltage:
NPN: < 200 mV @ 10 mA; < 1V @ 150 mA
PNP: < 1.25V @ 10 mA; < 2V @ 150 mA
|
|
Output Protection
|
Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up
|
|
Output Response Time
|
High-Speed Mode: 300 microseconds
Normal Mode: 1.8 ms
|
|
Repeatability
|
High-Speed Mode: 100 microseconds
Normal Mode: 150 microseconds
|
|
Adjustments
|
2 push buttons and remote wire
? Easy push-button configuration
? Manually adjust (+/–) cutoff (push buttons only)
? Light Operate/Dark Operate and OFF-delay configuration options (push buttons only)
? Push-button lockout (from remote wire only)
|
|
Indicators
|
8-segment red bargraph: Distance relative to cutoff point
Green LED: Power ON
Yellow LED: Output conducting
|
|
Construction
|
ABS plastic housing; acrylic lens cover
|
|
Environmental Rating
|
IP67, NEMA 6
|
|
Connections
|
5-conductor 2 m (6.5') PVC cable, 9 m (30') PVC cable, or 5-pin integral Euro-style quick-disconnect fitting
|
|
Operating Conditions
|
Temperature: -10° to +55°C (+14° to 122°F),
Max. relative humidity: 90% @ 55°C (non-condensing)
|
|
Vibration and Mechanical Shock
|
All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06
|
|
Certifications
|
C E
|
